Konica Minolta bizhub PRESS C8000e - Manual (Page 101)

bizhub PRESS C8000/e 3-37
3.1 Machine Configuration 3
No. Name Description
1 Secondary (sub) tray Holds sets output in non offset mode.
2 Top cover handle (left) Opens to allow removal of mishandled paper.
3 Top cover handle (right) Opens to allow removal of mishandled paper.
4 Paper removal indicator Lights while the stacker goes down when paper re-
moval button is pressed.
5 Paper removal button Pressed to take out printed sheets from the stacker.
6 Large Capacity Stacker LS-505 front
door Opens to take out printed sheets from the stacker.
7 Handle [LS7] Opens to allow removal of mishandled paper.
8 Handle [LS6] Opens to allow removal of mishandled paper.
9 Knob [LS3] Turned counterclockwise to feed mishandled paper to
the stacker.
10 Knob [LS2] Turned counterclockwise to feed mishandled paper to
the secondary (sub) tray.
11 Knob [LS4] Turned counterclockwise to feed mishandled paper to
the outlet.
12 Lever [LS1] Opens downward for removal of mishandled paper.
13 Jam position display Indicates the position of mishandled paper by LED
lamps.
14 Stacker Holds sets output in both non offset and offset
modes.
15 Lever [LS5] Opens downward for removal of mishandled paper.
16 Carriage Carries output sheets together with the stacker.
17 Paper holder Mounted with paper stopper for holding output
sheets.
18 Paper stopper Holds output sheets to prevent them collapsing.