Konica Minolta bizhub PRESS C8000e - Manual (Page 246)

6.8 Loading Paper 6
bizhub PRESS C8000/e 6-30
2
Adjust the position of side guides.
% Pull up the lock lever of the front side guide, then slide the
side guides to the desired position.
% Use the size indication on the bottom plate of the tray to de-
termine the position.
% Push down the lock lever securely to fix the side guides in
position.
3
Adjust the position of the rear guide.
% To slide the rear guide to the right, hold the top as illustrat-
ed, and slide the rear guide while pressing it down slightly.
% On the other hand, hold and slightly press down the bottom
of the rear guide to slide the rear guide to the left.
NOTICE
The rear guide cannot be slid smoothly to the right side without
being pressed down. Also, holding the rear guide at the top
may fail to slide it to the left side.
Be careful not to move the rear guide by force, otherwise it may
be damaged.
4
Load paper into the tray, then align the rear guide to the paper.
% Align the stack of paper to the right side of the tray.
NOTICE
Do not load more than 500 sheets (80 g/m 2 ). Also, do not load
paper above the limit indicated on the side guide. Otherwise, a
paper jam may be caused.
NOTICE
Be sure that the rear guide is securely aligned to the paper. If
any gap is left between the rear guide and paper, the machine
cannot detect the correct paper size, and machine trouble may
be caused.
5
Push in the tray until it locks into place.
The Amount indicator of the tray will change from to on the Machine Screen and Copy
Screen.