Konica Minolta bizhub PRESS C8000e - Manual (Page 469)

bizhub PRESS C8000/e 10-55
10.3 [01 User Setting] - [02 Common Setting] 10
10.3 [01 User Setting] - [02 Common Setting]
The following features can be provided by switching the selection.
NOTICE
[Needless Tab Paper Exit] is to be displayed on the machine having any configuration of options; however,
this setting functions only on the machine equipped with Paper Feeder Unit (with scanner) PF-705.
Menu item Description Setting options (with
default bolded)
[1 Shot Message Indica-
tion Time] Select the time span to display a shot message,
such as [Original size is A4], in the message area
of the touch panel. 3 seconds, 5 seconds
[Offset by Job Unit] Specify whether or not to offset the output sheets
by job. ON, OFF
Also specify the number
of jobs to be offset when
selecting ON for this
function (default: 1).
[Continuation Print] Specify whether or not to output multiple reserve
jobs in succession without stopping the machine
at a job break. Printer ON, Printer OFF
[Stop Button Function] Specify whether to pause or abort a job when
Stop is pressed on the control panel. Job Temp. Stop, Job
Stop Function
[Back Side Magnifica-
tion Adj.] Specify whether to enable the lens adjustment
mode. ON, OFF
[Tray Change Time] Select the time to wait before printing becomes
available when selecting another tray loaded with
different paper type after the current job is com-
pleted. Short, Standard
[Prior Paper Type] Specify whether or not to maintain the tempera-
ture suitable for coated paper by turning the fixing
unit roller. Others, Coated, Thin
Coated
[Dash Length (Page
Stamp)] Select the length of the dash to be used in a style
of [Page No.] in [Stamp]. Long, Short
[Center Crop Mark Trim
Margin] Specify the space between the center crop mark
and image area (center crop mark trim margin). 0.0-20.0 mm (default:
1.0)
[Schedule Cross Axis
Unit (Init. Value)] Select the unit of horizontal axis on the Schedule
Screen. Timetable, Time Frame
(m), Sheet Volume
[Hold Job for Outputting
(Init. Value)] Select the default for the operation to determine
whether or not to delete hold jobs after being out-
put. Delete, Save
[Destination for HDD
Recall (Default)] Select the default destination of recalled HDD
Store jobs. Print, Hold, Print & Hold
[Offset Output Mode] Specify how to offset the output sets. Change Out Pos., Par-
tition Paper (Tray 1 to 9,
PI 1, PI 2), Stop Print
[Needless Tab Paper
Exit] Specify whether or not to automatically discharge
the oddments of tabbed sheets loaded in a tray
as a set. ON, OFF
[Detect Double Feed
JAM] Specify whether or not to detect the double feed-
ing. ON, OFF
[Fusing Stability (Quick
Start)] Specify whether or not to wait till the machine
completes the warmup to meet controlled tem-
perature conditions for a specified tray when a
print job is queued. Speed, Image Quality
[Fusing Stability (Mixed
Media)] Specify whether or not to wait till the machine
completes the warmup for a tray to be switched
from the one currently used, if they have different
temperature while operating a print job with mul-
tiple trays specified. Speed, Image Quality,
Best Quality