Konica Minolta bizhub PRESS C8000e - Manual (Page 263)

bizhub PRESS C8000/e 6-47
6.13 Removing Perfect-Bound Books from Perfect Binder PB-503 Tray 6
6.13 Removing Perfect-Bound Books from Perfect Binder PB-503 Tray
1
Check the stacks through the perfect binder tray window.
If piled books show only on the right side of the tray, proceed to step 2.
If two columns of books show on the tray, proceed to step 3.
2
Press the feeding button to move the books to the carriage.
% Delivery to the perfect binder tray is available even if the car-
riage is not installed inside the perfect binder tray. In this
case, tray capacity will be a half of that with the carriage in-
stalled. (1 set 30 mm thick e 11 e 1 column = approx. 3,300
sheets)
% The feeding button does not function while the machine is
delivering finished books onto the perfect binder tray.
% The feeding button does not function without the carriage
installed.
3
Open the perfect binder tray front door.
% The perfect binder tray front door does not open while the
machine is delivering finished books onto the perfect binder
tray, or sliding them with the feeding button pressed.
4
Slowly withdraw the carriage.
% Be sure to withdraw the carriage slowly. Otherwise, the piled
books may collapse.