Konica Minolta bizhub PRESS C8000e - Manual (Page 363)

bizhub PRESS C8000/e 9-45
9.7 [03 Finisher Adjustment] (Saddle Stitcher SD-506) 9
7
Check the staple pitch (a) of the sample.
Allowance: a = b/2 +/- 2 mm
8
If any adjustment is required, press [Exit Print Mode] to return to the Staple Pitch Adjustment Screen.
9
Use the touch panel keypad or control panel keypad to enter the setting data.
% Use [+/-] to specify the value to be positive or negative.
% Press [Set] to change the current data.
% Adjustable range: -20 (Narrow) to +20 (Wide) (1 step = 0.1 mm)
10
Repeat the steps from 4 to 9 until the desired result is obtained.
% Available range of the adjustment varies depending on paper sizes. The minimum value is subject
to the traveling range of stapler, while the maximum value requires that the exit guides and stapler
do not interfere in the saddle stitcher.
B5 w: Setting unavailable (91 mm fixed)
B4 w: -20 to +20 mm (108.5 to 148.5 mm)
A4 w: -14 to +14 mm (91 to 119 mm)
A3 w: -20 to +16.5 mm (128.5 to 165 mm)
11
Press [Return] to restore the Saddle Stitcher Adjustment Menu Screen.
9.7.4 [06 Saddle Stitcher Pos. Adj.] - [04 Half-Fold Position Adj.]
Adjust the half-folded position determined by Saddle Stitcher SD-506.
Objects of adjustment: Full Area, SRA3 w, A3 w, B4 w, SRA4 w, A4 w, B5 w, 13 e 19 w, 12 e 18 w,
11 e 17 w, 8.5 e 14 w, 8.5 e 11 w, 8.125 e 13.25 w, 8.5 e 13 w, 8.25 e 13 w, 8 e 13 w, 8K w, 16K w,
Custom (380-463 mm), Custom (257-379 mm)
NOTICE
With [Full Area] selected, the entered value will be applied to all sizes. With a specific paper size selected, set
value will be the sum of the entered value and the value previously specified for [Full Area].
1
Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.