Konica Minolta bizhub PRESS C8000e - Manual (Page 245)

bizhub PRESS C8000/e 6-29
6.8 Loading Paper 6
5
Thoroughly fan the stack of paper before loading it into a tray.
Fan the stack at both front and rear edges in feeding direction,
holding it as illustrated below.
% Be sure to lay the stack of paper onto a flat place to fan it.
Holding up and fanning the stack may result in damage to
the paper due to droppage.
% Do not fan a large amount of paper at a time.
6.8.2 Loading Paper in Main Body Trays (Trays 1 to 3)
To use paper other than loaded in a tray, change the setting of that tray in [Paper Setting] from the Machine
Screen or Copy Screen.
1
Withdraw the tray to be supplied with paper, and then open the
feed roller.
NOTICE
Be sure to fully withdraw the tray until a blue label shows on the
rear-left side of the tray. Otherwise, the feed roller may not open
or other machine trouble may be caused.
To load the same size as loaded before, proceed to step 3.
To load a different size of paper, proceed to step 2.