Konica Minolta bizhub PRESS C8000e - Manual (Page 387)

bizhub PRESS C8000/e 9-69
9.9 [03 Finisher Adjustment] (Finisher FS-612) 9
9.9.6 [03 Punch Adjustment] - [04 Paper Edge Detect Sensor]
Detect the edge of paper to be a reference point in punching operation using Finisher FS-612.
1
Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.
2
Press [03 Finisher Adjustment], [03 Punch Adjustment], and [04 Paper Edge Detect Sensor] in se-
quence.
3
Press [Start] on the control panel.
4
Press [Return] to restore the Punch Adjustment Menu Screen.
9.9.7 [04 Tri-Fold Adjustment]
Adjust the tri-folded positions for each paper size if needed, when using Finisher FS-612.
Objects of adjustment: Full Area, A4 w, 8.5 e 11 w, 16K w
1
Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.
2
Press [03 Finisher Adjustment] and [04 Tri-Fold Adjustment] in sequence.
The Tri-Fold Adjustment Screen will be displayed.
3
Select the size to be adjusted.
4
Press [Print Mode].
5
Load the paper size to be adjusted into a tray, then select that tray key.
6
Press Start on the control panel. A sample pattern will be output.