Konica Minolta bizhub PRESS C8000e - Manual (Page 258)

6.10 Loading Tabbed Sheets 6
bizhub PRESS C8000/e 6-42
6.10 Loading Tabbed Sheets
Tabbed sheets are available for copying when loaded in the following trays.
- Main body trays (trays 1 to 3)
- Paper Feeder Unit PF-704 (trays 4 to 9)
- Paper Feeder Unit (with scanner) PF-705 (trays 4 to 6)
d
Reference
When loading a tray with tabbed sheets, be sure to make the size setting of the tray to specify a tab paper size
to be used. See page 5-16 for details.
6.10.1 Loading Tabbed Sheets in Main Body Trays (Trays 1 to 3)
Example: 3 tabbed sheets loaded in position for one finished set
Example: 9 tabbed sheets loaded in position for 3 finished sets
1
Withdraw the tray to be loaded with tabbed sheets.
Withdraw the tray specified for a tab paper size.
2
Open the feed roller.
3
Load tabbed sheets into the tray.
% Place tabbed sheets on the main body tray referring to the illustration shown above.
NOTICE
Do not load above the limit level indicated on the side guide of the tray.
Loading orientation Stacking order Finished set
Loading orientation Stacking order Finished set
Rear
Front
1st tab
2nd tab
3rd tab
Printed/
copied side
1st tab
2nd tab
3rd tab
1 finished set
Rear
Front
1st tab
2nd tab
3rd tab
Printed/
copied side
1st tab 2nd tab
3rd tab
3 finished sets