Konica Minolta bizhub PRESS C8000e - Manual (Page 135)

bizhub PRESS C8000/e 4-13
4.1 Paper Information 4
*1
: ISO standard sizes are used for B series as default. For ISO/JIS switching, please contact your service
representative.
*2
: SRA3 w, A5 w, B6 w, and 5.5 e 8.5 w are available for straight output only.
*3 : Max. 314 mm e 458 mm to min. 128 mm e 148 mm for straight output only.
*4
: Min. 128 mm e 139 mm for straight output only.
*5 : Foolscap refers to 8 e 13 w, 8.12 e 13.2 w, 8.25 e 13 w, and 8.5 e 13 w.
4.1.4 Auto Tray Switch (ATS) Function
When the selected paper tray becomes empty while printing is in progress, the machine automatically switch-
es the paper tray source to continue printing without interruption only if there is another tray that meets the
following conditions. Make the following settings in [02 User Setting] - [01 System Setting] - [03 Paper Tray
Setting].
- In [02 Auto Tray Selection Setting], select the trays to be automatically selected when Auto Paper func-
tions. Priority order can also be specified.
- In [03 Type for Auto Paper], specify conditions to be a target tray of automatic selection even when the
paper setting of the tray and required conditions do not completely match.
Paper trays should be loaded with paper as specified below.
- The same size in the same orientation
- The same paper type
4.1.5 To Store Paper
Observe the following precautions when storing paper.
- Store paper in a cool, dry area.
- Using damp paper may cause a paper misfeed. Keep partially used packages tightly wrapped during
storage.
- Do not place paper packages vertically to store. Paper curl due to the vertical storage may cause a pa-
per misfeed.
- Do not leave paper in a place within easy reach of children.
Finisher FS-612 Primary (main)
tray (straight/off-
set delivery) Standard: A3 w, B4 w
*1
, SRA4 w, A4 w/v, B5 w
*2
/v
*1
,
A5 w
*2
/v, B6 w
*2
, 12 e 18 w, 11 e 17 w, 8.5 e 14 w,
8.5 e 11 w/v, 5.5 e 8.5 w
*2
, Foolscap
*5
, 9 e 11 v
Custom: max. 314 mm e 458 mm to min. 182 mm e
148 mm
Tab Paper (only with the tab side ahead in output direction)
Secondary (sub)
tray Standard: SRA3 w, A3 w, B4 w
*1
, SRA4 w/v, A4 w/v,
B5 w/v
*1
, A5 w/v, B6 w
*1
, A6 w, 13 e 19 w, 12 e 18 w,
11 e 17 w, 8.5 e 14 w, 8.5 e 11 w/v, 5.5 e 8.5 w/v,
Foolscap
*5
, 9 e 11 v
Custom: max. 330 mm e 488 mm to min. 100 mm e
139 mm
Tab Paper (only with the tab side ahead in output direction)
Relay Unit RU-506 Standard: SRA3 w, A3 w, B4 w
*1
, SRA4 w, A4 w/v,
B5 w/v
*1
, A5 v, 13 e 19 w, 12 e 18 w, 11 e 17 w,
8.5 e 14 w, 8.5 e 11 w/v, 5.5 e 8.5 v, Foolscap
*5
,
9 e 11 v, Tab Paper
Custom: max. 324 mm e 463 mm to min. 95 mm e 133 mm
Multi Punch GP-501 A4 v, 8.5 e 11 v
Equipment Available sizes