Konica Minolta bizhub PRESS C8000e - Manual (Page 374)

9.8 [03 Finisher Adjustment] (Perfect Binder PB-503) 9
bizhub PRESS C8000/e 9-56
1
Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.
2
Press [03 Finisher Adjustment], [07 Perfect Binder Adjustment], and [04 Glue Start Position] in se-
quence.
The Glue Start Position Adjustment Screen will be displayed.
3
Load cover sheets in either cover tray of perfect binder or any other tray.
4
Load paper for body sets in the desired tray.
5
Select the size to be adjusted using [+] and [,] to scroll.
% The size referred to here is that of perfect-bound books.
6
Press [Print Mode].
7
Select the tray key loaded with paper for body sets.
8
Press Start on the control panel. A sample pattern of perfect-bound book will be output.
9
Check that the glue starts in proper position on both frontward and backward ends of the body set.
10
If any adjustment is required, press [Exit Print Mode] to return to the Glue Start Position Adjustment
Screen.
11
Select either [Ahead] or [Back].
12
Use the touch panel keypad or control panel keypad to enter the setting data.
% Use [+/-] to specify the value to be positive or negative.
% Press [Set] to change the current data.
% Adjustable range: -128 (Soon) to +127 (Late) (1 step = 0.1 mm)
% If desired, display the help message to view details of the adjustment you made.
13
Repeat the steps from 6 to 12 until the desired result is obtained.
14
Press [Return] to restore the Perfect Binder Adjustment Menu Screen.
9.8.5 [07 Perfect Binder Adjustment] - [05 Glue Finish Position]
Adjust the position to finish gluing on the body set using Perfect Binder PB-503. The sizes referred to in this
section are those of body sets corresponding to cover sizes.
Objects of adjustment: Ahead (rear)--Full Area, A4 v, B5 v, A5 w/v, 8.5 e 11 v, 5.5 e 8.5 w, 16K v, Custom
(220-379 mm), Custom (148-219 mm); Back (front)--Full Area, A4 v, B5 v, A5 w/v, 8.5 e 11 v, 5.5 e 8.5 w,
16K v, Custom (220-379 mm), Custom (148-219 mm)
NOTICE
With [Full Area] selected, the entered value will be applied to all sizes. With a specific paper size selected, set
value will be the sum of the entered value and the value previously specified for [Full Area].
[1] Body pages [2] Start position of backward gluing [3] Start position of frontward gluing