Konica Minolta bizhub PRESS C8000e - Manual (Page 164)

5.2 Paper Setting 5
bizhub PRESS C8000/e 5-24
13
Select the desired one from [Standard], [Custom], and [Tab Paper].
Proceed to step 14 for setting [Standard].
Proceed to step 15 for setting [Custom].
Proceed to step 16 for setting [Tab Paper].
% [Tab Paper] will not be displayed with [PI 1] or [PI 2] selected in step 5.
% [Standard] and [Tab Paper] will not be displayed with [PB] selected in step 5.
14
With [Standard] selected, the machine automatically detects the standard size when loaded in that tray.
% There is, however, a group of sizes having subtle distinctions, so that the machine cannot distin-
guish in the operation of size detection. Let the machine detect a specific size by identifying these
sizes as any one of them.
Press [Detect Size Setting]. The Detect Size Setting Screen will be displayed.
Groups of indistinguishable sizes are arranged in columns. Press the desired size in each column to
select it. Press [OK].
% Detectable sizes may vary depending on the selection made for the use of K sizes in the Adminis-
trator Setting provided on the Utility Menu Screen. See page 10-86 for details.
% Detectable standard sizes vary depending on the paper tray.
Proceed to step 17.