Konica Minolta bizhub PRESS C8000e - Manual (Page 529)

bizhub PRESS C8000/e 10-115
10.10 [02 Administrator Setting] - [04 Network Setting] 10
4
When required entries are completed, run a transceiving test.
% Pressing [Test] will display the confirmation dialog. Press [Yes] to check that the setting has been
made properly.
5
Press [OK] to complete the setting.
% To cancel the change, press [Cancel]. In either case, the Network Setting Menu Screen will be re-
stored.
10.10.3 [03 http Communication Setting]
Configure the http communication settings.
1
Follow the procedure on page 10-3 to display the Administrator Setting Menu Screen.
2
Press [04 Network Setting] and [03 http Communication Setting] in sequence.
The http Communication Setting Screen will be displayed.
3
Make a setting for each item.
% Press an item key to display the setting screen for each. When an entry screen or screen with touch
panel keypad is displayed, make an entry as desired, then press [OK] to complete it.
4
Press [OK] to complete the setting.
% To cancel the change, press [Cancel]. In either case, the Network Setting Menu Screen will be re-
stored.