Konica Minolta bizhub PRESS C8000e - Manual (Page 440)

10.2 [01 User Setting] - [01 System Setting] 10
bizhub PRESS C8000/e 10-26
NOTICE
Among the paper settings provided on the Machine Screen, only the process adjustment is initially disabled
and can be enabled later. Contact your service representative, if desired.
d
Reference
See page 5-36 for details of Both Sides Adjust.
See page 5-48 for details of Curl Adjustment.
See page 9-87 for detailed settings of Color Density Control.
Process Adjust-
ment Make the process adjustment for
each of transfer, separation, fusing,
and the second fusing functions, and
make a selection for Speed Down,
CPM Down, and Uncoated Paper
Black Density Adjustment.
Selecting [ON (Type A)] for [Speed
Down] may require further adjust-
ments to 2nd Transfer Output, Sepa-
ration AC, or Separation DC.
Selecting [+1], [+2], or [+3 (Max)] for
[Uncoated Paper Black Density Ad-
justment] will increase black toner
consumption in printing on paper
types other than coated paper. 2nd Transfer Output Adj. (Front): -50 to
+50
2nd Transfer Output Adj. (Back): -50 to
+50
2nd Transfer-Lead Edge (Front): -20 to 0
2nd Transfer-Lead Edge (Back): -20 to 0
2nd Transfer-Rear Edge (Front): -50 to
+50
2nd Transfer-Rear Edge (Back): -50 to
+50
Separation AC (Front): -50 to +50
Separation AC (Back): -50 to +50
Separation DC (Front): -30 to +30
Separation DC (Back): -30 to +30
Fusing Roller Center Temp. (Idle): -10 to
+10
Fusing Roller Center Temp. (Print): -10 to
+10
Fusing Roller Edge Temp. (Idle): -10 to
+10
Fusing Roller Edge Temp. (Print): -10 to
+10
Fus. Underbelt Center Temp. (Idle): -10
to +10
Fus. Underbelt Center Temp. (Print): -10
to +10
Fus. Out Heat Center Temp. (Idle): -10 to
+10
Fus. Out Heat Center Temp. (Print): -10
to +10
Fus. Out Heat Edge Temp. (Idle): -10 to
+10
Fus. Out Heat Edge Temp. (Print): -10 to
+10
2nd Fus. T-Belt Center Temp. (Idle): -10
to +10
2nd Fus. T-Belt Center Temp. (Print): -10
to +10
2nd Fus. U-Belt Center Temp. (Idle): -10
to +10
2nd Fus. U-Belt Center Temp. (Print): -10
to +10
Speed Down: OFF, ON (Type A), ON
(Type B)
CPM Down: Normal, Down
Uncoated Paper Black Density Adjust-
ment: 0 (Normal), +1, +2, +3 (Max)
Color Density The machine mounted with Relay
Unit RU-508 provides [Color Density]
on the screen. This setting is enabled
when [Yes] is selected for [Use Color
Density Control] accessed from [05
Color Density Control] - [01 Color
Density Control] on the Adjustment
Menu Screen. Default Adj. Data, Paper Category, OFF
Setting item Description Setting options