Konica Minolta bizhub PRESS C8000e - Manual (Page 480)

10.7 [02 Administrator Setting] - [01 System Setting] 10
bizhub PRESS C8000/e 10-66
10.7.8 [04 Restrict User Access] - [04 Sample Print Restrict]
Specify whether or not to allow the use of sample print function.
NOTICE
This key is displayed to function on the machine mounted with Image Controller IC-601.
1
Follow the procedure on page 10-3 to display the Administrator Setting Menu Screen.
2
Press [01 System Setting], [04 Restrict User Access], and [04 Sample Print Restrict] in sequence.
3
Select either [Allow] or [Restrict].
4
Press [OK] to complete the setting.
% To cancel the change, press [Cancel].
In either case, the Restrict User Access Menu Screen will be restored.
10.7.9 [04/05 Expert Adjustment] - [01 Printer Adjustment] - [01 Restart Timing Ad-
justment]
Adjust the image position of lead edge in paper feed direction in the printer engine.
This operation is the same as that in [Adjustment] - [01 Machine Adjustment] - [01 Printer Adjustment] - [01
Restart Timing Adjustment], accessed from the Machine Screen.
NOTICE
Make this adjustment after completing the FD-Mag. Adjustment.
NOTICE
The title number given to [Expert Adjustment] will be [04] for the machine without Image Controller IC-601,
or [05] for the machine with that option mounted.
Setting item Description
[Allow] Allows the use of sample print function.
[Restrict] Restricts the use of sample print function.