Konica Minolta bizhub PRESS C8000e User Manual
Page 355
bizhub PRESS C8000/e
9-37
9.5
[03 Finisher Adjustment] (Folding Unit FD-503)
9
9.5.8
[03 Multi Folder (Fold) Adj.] - [06 Gate Position Adj.]
Adjust the folded positions in Gate mode determined by Folding Unit FD-503.
Objects of adjustment: Full Area, A3 w, B4 w, SRA4 w, A4 w, 12 e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w,
8K w, Custom (380-458 mm), Custom (279-379 mm)
NOTICE
When adjusting all of Single Fold, Double Fold, and Triple Fold, be sure to start with the Single Fold adjust-
ment in order. The position of Single Fold is calculated from the edge of the sheet, while that of Double Fold
is calculated from the position of Single Fold and that of Triple Fold from that of Double Fold. Consequently,
the measurements (a), (b), and (c) in step 7 are subject to the change in any position of the fold.
NOTICE
With [Full Area] selected, the entered value will be applied to all sizes. With a specific paper size selected, set
value will be the sum of the entered value and the value previously specified for [Full Area].
1
Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.
2
Press [03 Finisher Adjustment], [03 Multi Folder (Fold) Adj.], and [06 Gate Position Adj.] in sequence.
The Gate Position Adjustment Screen will be displayed.
3
Select the size to be adjusted using [+] and [,] to scroll.
4
Press [Print Mode].
5
Load the paper size to be adjusted into a tray, then select that tray key.
6
Press Start on the control panel. A sample pattern will be output.
7
Measure the lengths (a), (b), and (c) of the output sheet.
Allowance: a +/- 1.5 mm, b +/- 1.5 mm, c +/- 1.5 mm
Paper size
a
b
c
11 e 17 w
106.5 mm
218.9 mm
109.5 mm
A3 w
103.5 mm
213.0 mm
106.5 mm
B4 w
86.7 mm
179.5 mm
89.7 mm
8.5 e 14 w
87.4 mm
180.8 mm
90.4 mm
A4 w
72.8 mm
151.5 mm
75.8 mm
8.5 e 11 w
68.4 mm
142.7 mm
71.4 mm
8K w
96.0 mm
198.0 mm
99.0 mm
12 e 18 w
112.8 mm
231.6 mm
115.8 mm
SRA4 w
78.5 mm
163.0 mm
81.5 mm