Konica Minolta bizhub PRESS C8000e - Manual (Page 186)

5.3 Both Sides Adjust 5
bizhub PRESS C8000/e 5-46
4
Press the [Front] or [Back] tab to select the print side to be adjusted.
5
Enter numeric values for Zoom and Image Shift using the touch panel keypad or control panel keypad.
% To adjust the Zoom, press [Vertical] or [Horizontal] and then enter a desired value.
[Vertical] adjusts the magnification in crosswise direction.
[Horizontal] adjusts the magnification in paper feed direction.
Enter a positive value to enlarge the print area, or a negative value to reduce it.
The adjustment value changes in 0.01% increments.
Adjustment range:
% -100 to +100 for [Vertical] on both [Front] and [Back], and for [Horizontal] on [Front]
% -80 to +20 for [Horizontal] on [Back]
% To adjust the Image Shift, press [Up/Down] or [Right/Left] and then enter a desired value.
Enter a positive value to move the print area upward or rightward, or a negative value to move it down-
ward or leftward.
The adjustment value changes in 0.1 mm increments.
Adjustment range:
% -100 to +100 for [Up/Down]
% -30 to +30 for [Right/Left]
% You can change the value by pressing [,] and [+].
% Use [+/-] to specify the value to be positive or negative.
% Press [Clear] to reset the entered value to [+0].