Konica Minolta bizhub PRESS C8000e - Manual (Page 551)

bizhub PRESS C8000/e 11-5
11.2 [Controller] - [01 Controller NIC Setting Menu] 11
11.2 [Controller] - [01 Controller NIC Setting Menu]
1
Follow the procedure on page 11-3 to display the Controller Administrator Setting Screen.
2
Press [01 Controller NIC Setting Menu] to display the Controller NIC Setting Menu Screen.
3
Make the desired setting for each menu item.
For details of each menu item, see the following table of "List of Controller NIC Setting."
NOTICE
If the message [Setting will be reflected after the main power turned off/on] is displayed after any setting
change is made in the Controller NIC Setting, be sure to turn the main power switch off then on.
4
Press [OK] to complete the setting.
% To cancel the change, press [Cancel]. In either case, the Controller NIC Setting Menu Screen will be
restored.
List of Controller NIC Setting
Menu Item/Description Setting options (with default bolded)
01 TCP/IP Setting
TCP/IP Setting
TCP/IP Setting Enable, Disable
IP Address Setting Method Auto Setting, Manual Setting* 1
Auto Setting
DHCP Setting Enable, Disable
BOOTP Setting Enable, Disable
ARP/PING Setting Enable, Disable
AUTO IP Setting Enable, Disable
Direct Setting
IP Address 0.0.0.0 (0-255)
Subnet Mask 0.0.0.0 (0-255)
Default Gateway 0.0.0.0 (0-255)
IPv6 Setting
IPv6 Setting Enable, Disable* 2
IPv6 Auto Setting Enable, Disable*
3
IPv6 DHCP Setting Enable, Disable
Global Address 0000:0000:0000:0000:0000:
0000:0000:0000 (1-39 bytes)*
4