Konica Minolta bizhub PRESS C8000e User Manual

Page 562

11.2

[Controller] - [01 Controller NIC Setting Menu]

bizhub PRESS C8000/e

11-16

Status Notification/SNMP Trap

Group 1-5

Trans Setting

Enable, Disable

Trans Address

IPv4 Change
0.0.0.0 (0-255)
IPv6 Change
0: 0: 0: 0: 0: 0: 0: 0
Host Name Change
Up to 253 characters combining symbols
and alphanumerics can be used.

Trans Port No.

1-65535 (162)

Trans Community Name

public
Up to 15 characters combining symbols and
alphanumerics can be used.

Trans Items

Service Call, JAM, Replenish Paper Tray,
Toner Supply, PM Call, Staple Cartridge
Supply, Finisher Tray Full, Dispose of Punch
Scrap Box, Dispose of Trim Scrap Box, Glue
Pellet Supply, Exchange Trim Receiver, Ton-
er Recovery Box Full, Dispose of Staple
Scrap Box, Humidifier Tank Supply

Trans Setting

Enable, Disable

Trans IPX Network Address

00: 00: 00: 00

Trans IPX Node Address

00: 00: 00: 00: 00: 00

Trans IPX Community Name

public
Up to 15 characters combining symbols and
alphanumerics can be used.

Trans Items

PING Confirmation

PING Send Address

IPv4 Change
0.0.0.0 (0-255)
IPv6 Change
0: 0: 0: 0: 0: 0: 0: 0 (1-39 bytes)
Host Name
Up to 253 characters combining symbols
and alphanumerics can be used. *

Check Connection

Start

LPD Setting

Enable, Disable

SLP Setting

Enable, Disable

LLTD Setting

Enable, Disable

SSDP Setting

Enable, Disable

For Invalid Certificate

Job Delete, Job Continue

Network Setting Clear

Start

*1:

Select [Auto Setting] to make "DHCP Setting," "BOOTP Setting," "ARP/PING Setting," and
"AUTO IP Setting" available. However, changing the selection from [Auto Setting] to [Direct
Setting] invalidates the settings made for "DHCP Setting" and "BOOTP Setting." Also, chang-
ing from [Direct Setting] to [Auto Setting] validates the settings made for "DHCP Setting,"
"BOOTP Setting," "ARP/PING Setting," and "AUTO IP Setting."

Menu Item/Description

Setting options (with default bolded)