Konica Minolta bizhub PRESS C8000e - Manual (Page 264)

6.13 Removing Perfect-Bound Books from Perfect Binder PB-503 Tray 6
bizhub PRESS C8000/e 6-48
5
When moving the carriage with books piled on it, use the book
holding plate and book stopper to fix the books onto the car-
riage, in order to prevent them from collapsing.
% Move the book holding plate lever to align the plate to the
books.
% Insert the book stopper into the desired positioning hole on
the carriage to align it to the books.
6
Take out the books from the carriage.
Before taking out the books, be sure to remove the book holding plate and book stopper, if used.
7
Return the carriage to its original position, then close the perfect binder tray front door.
8
If the column of books is left on the right side of the tray, repeat steps from 2 to 7.