Konica Minolta bizhub PRESS C8000e - Manual (Page 464)

10.2 [01 User Setting] - [01 System Setting] 10
bizhub PRESS C8000/e 10-50
5
Select the period of time that must elapse before Auto Shut OFF is activated.
% Use the keys [+] and [,] provided under "Auto Shut OFF" on the right side of the screen to select
the desired period of time. The default setting is [90 min.]
% Select [---min.] to deactivate the Auto Shut OFF function.
6
Press [OK] to complete the setting.
% To cancel the change, press [Cancel]. In either case, the System Setting Menu Screen will be re-
stored.
10.2.11 [07 Date/Time Setting]
Set the current date and time for built-in clock of the machine, and specify whether or not to activate the Day-
light Saving Time function. With Daylight Saving Time activated, the time lag can be specified as desired. Al-
so, use Time Zone to specify the time difference from the universal time. The Daylight Saving Time is
deactivated as default.
1
Follow the procedure on page 10-3 to display the User Setting Menu Screen.
2
Press [01 System Setting] and [07 Date/Time Setting] in sequence.
3
Set the current date and time for built-in clock of the machine.
The screen shows the current setting of date and time, ordered by day, month, year, and time (in 24-
hour expression).
% Use the touch panel keypad to enter the day in two digits.
% Press [Set] in the lower right corner of the touch panel keypad to fix the entry. The highlighted sec-
tion shifts to the right. Repeat the same procedure for month, year, and time.
4
Set the Daylight Saving Time.
The Daylight Saving Time is deactivated as default.
% To activate the Daylight Saving Time, press [ON] on the right side of [Daylight Saving Time]. [Daylight
Saving Time] will be highlighted on the screen.
% Use the touch panel keypad to enter the time to gain.
% Press [Set] in the lower right corner of the touch panel keypad to fix the entry.
5
Specify the time difference from the standard time.
This gives the time difference information at the same time when an e-mail is received. The time differ-
ence is predefined for each country or region.
% Press [Time Zone], then enter the time difference from the touch panel keypad. (For example, enter
"-0600" for six hours later than the universal time.)
% Press [+/-] to display "+" for the local time earlier than the universal time, or "-" for the later.
% Press [Set] in the lower right corner of the touch panel keypad to fix the entry.