Konica Minolta bizhub PRESS C8000e - Manual (Page 225)

bizhub PRESS C8000/e 6-9
6.4 Replenishing Staple Supply 6
6.4 Replenishing Staple Supply
The following options have staplers installed.
- Finisher FS-521
- Finisher FS-612
- Saddle Stitcher SD-506
This section describes indications on the screen to inform you that the staple supply is due, and also instruc-
tions on how to replenish it.
6.4.1 Replenishing Staple Supply in Finisher FS-521
When the staple cartridge of Finisher FS-521 becomes empty, the following message will appear in the mes-
sage area of the screen.
[Please pull out staple finisher stacker and add staples to the front stapler]
[Please pull out staple finisher stacker and add staples to the back side stapler]
The Staple Cartridge indicator lights in red in the Consumable and Scrap Indicators area of the Machine
Screen.
Be sure to supply the designated stapler with staples.
NOTICE
Do not pull the tape upward. Otherwise, the tape may rip and remain inside the cartridge, so that the staples
cannot be used.