Konica Minolta bizhub PRESS C8000e - Manual (Page 271)

bizhub PRESS C8000/e 7-3
7.1 Cleaning 7
7 Maintenance
7.1 Cleaning
In order to maintain optimum copy quality, always keep the following areas clean.
7.1.1 Cleaning the Exterior
Wipe the exterior clean with a soft cloth dampened slightly with neu-
tral detergent.
NOTICE
Be sure to turn off the main power switch of the main body before
cleaning.
NOTICE
Never use paint solvents, such as benzine or thinners, to clean the ex-
terior of the machine.
7.1.2 Cleaning the Control Panel
Clean the control panel with a dry soft cloth.
NOTICE
Be careful not to press the keys or touch panel too hard while cleaning
the control panel. Never use neutral detergent, glass cleaner, or paint
solvents such as benzine or thinners to clean the control panel.
7.1.3 Cleaning the Conveyance Belt of Saddle Stitcher SD-506 Tray
The conveyance belt of saddle stitcher tray should be kept clean, otherwise soil marks may be printed. Fol-
low the procedure below to clean the conveyance belt of saddle stitcher tray.
In order to maintain optimum print quality, we recommend to clean it every time before using the saddle
stitcher tray.
If any soil marks are found while printing, perform this cleaning procedure immediately.
1
Fully withdraw the saddle stitcher tray.