Konica Minolta bizhub PRESS C8000e - Manual (Page 546)

10.14 [03 Touch Panel Adjustment] 10
bizhub PRESS C8000/e 10-132
4
Check the coordinates.
% Check that the X coordinate and Y coordinate displayed in the first line under "Touch Panel Adjust-
ment" fall within the range of standard value displayed in the second line.
% If the coordinates fall out of the range, repeat the adjustment procedure or contact your service rep-
resentative.
5
Press each Check Button at the upper left and lower right corners on the screen to check that the buzz-
er tone functions normally.
% If the buzzer tone does not sound, repeat the adjustment procedure or contact your service repre-
sentative.
6
Press [0] on the control panel keypad to complete the setting.
% To cancel the setting, press [1] on the control panel keypad to return to the Utility Menu Screen.