Konica Minolta bizhub PRESS C8000e - Manual (Page 396)

9.11 [04 Density Balance Adjustment] 9
bizhub PRESS C8000/e 9-78
1
Load the density balance chart that has been output by following the procedure on page 9-75, in order
to create the measured colorimetric data.
2
Specify the desired name to the colorimetric data.
% Enter [(up to 14 characters of identifying information printed on the chart)_(up to 21 characters of
user-customized information).txt] as a file name.
3
Set the path [/C8000/ADJUST_DATA] to a USB flash drive, and save the measured data in the lowest
directory.
NOTICE
The colorimetric data cannot be recognized on the machine with any path other than that specified. Be
sure to set the designated path to save the data. The machine will output two sheets of chart with [Type
2] of "Measure Spectrophotometer-1 (i1-iSis)" selected. Load the two sheets of chart in succession,
then save those data together. Use the same user-customized information for the first and second
charts to enter the file name.