Konica Minolta bizhub PRESS C8000e - Manual (Page 488)

10.7 [02 Administrator Setting] - [01 System Setting] 10
bizhub PRESS C8000/e 10-74
10
Press [OK] to complete the setting.
% To cancel the change, press [Cancel]. In either case, the Process Adjustment Menu Screen will be
restored.
10.7.19 [04/05 Expert Adjustment] - [03 Process Adjustment] - [04 1st Trans. Dis-
elec. Output]
Set the discharging voltage in each color of CMYK for the 1st transfer belt in order to measure each current
value of AC/DC of the 1st transfer discharged electric pole.
NOTICE
The title number given to [Expert Adjustment] will be [04] for the machine without Image Controller IC-601,
or [05] for the machine with that option mounted.
1
Follow the procedure on page 10-3 to display the Administrator Setting Menu Screen.
2
Press [01 System Setting], [04/05 Expert Adjustment], [03 Process Adjustment], and [04 1st Transfer
Dis-elec. Pole Output] in sequence.
3
Select the desired condition for each color of CMYK.
4
Press [OK] to complete the setting.
% To cancel the change, press [Cancel]. In either case, the Process Adjustment Menu Screen will be
restored.
10.7.20 [04/05 Expert Adjustment] - [03 Process Adjustment] - [05 Scattering Filter
Cleaning]
Manually clean the filter to prevent the developer from scattering inside the machine. Use this function as an
assistance for automatic cleaning.
NOTICE
The title number given to [Expert Adjustment] will be [04] for the machine without Image Controller IC-601,
or [05] for the machine with that option mounted.