Allied Telesis AT-S60 - Manual (Page 86)

AT-S60 Management Software User’s Guide
Section II: Local and Telnet Management 85
Selecting a Switch in an Enhanced Stack
Before performing a procedure on a switch, check that you are accessing
the correct switch. If you assigned system names to your switches, this is
a simple check. The name of the switch you are currently managing is
displayed at the top of every management menu. For example, in Figure
23, the name of the switch is Sales Switch 591.
When you start a management session on the Master switch of a subnet,
you are, by default, addressing that particular switch. The management
tasks that you perform effect only the master switch.
To manage a slave switch or another Master switch in the subnet, you
need to select it from the management software.
To select a switch to manage in an enhanced stack, perform the
following procedure:
1. From the Main Menu, type 8 to select Enhanced Stacking.
The Enhanced Stacking menu is shown in Figure 22 on page 84.
2. From the Enhanced Stacking menu, type 2 to select Stacking Services.
The Stacking Services menu is shown in Figure 23.
Figure 23 Stacking Services Menu
Allied Telesyn AT-8400 Series - ATS60 V2.0.0
Sales Switch 591
User: Manager 00:14:33 15-Jan-2003
Stacking Services
Switch Software Switch
Num MAC Address Name Mode Version Model
-------------------------------------------------------------
1 - Get/Refresh List of Switches
2 - Sort Switches in New Order
3 - Access Switch
4 - Download Image/Bootloader
R - Return to Previous Menu
Enter your selection?