Allied Telesis AT-S60 - Manual (Page 423)

Chapter 25: 802.1x Port-Based Access Control
Section III: Security Features 422
Displaying Port Access Status
There are three ways to display port access status. You can display:
❑ Port roles assigned to all ports
❑ All Authenticator ports and their associated parameters
❑ All Supplicant ports and their associated parameters
Each type of display provides different parameters. As a result, the
advantage of displaying the individual authenticator and supplicant
port information is that more information is given.
Displaying Port
Access Status
To display the port access status of all the ports on the switch as None,
Authenticator, or Supplicant, perform the following procedure:
1. From the Main Menu, type 6 to select Security Menu.
The Security Menu is shown in Figure 30 on page 105.
2. From the Security Menu, select Port Access Control.
The Port Access Control Menu is shown in Figure 144 on page 411.
3. From the Port Access Control Menu, type 6 to select Display Port
Access Status.