Allied Telesis AT-S60 - Manual (Page 417)

Chapter 25: 802.1x Port-Based Access Control
Section III: Security Features 416
3. From the Port Access Control menu, type 4 to select Configure
Authenticator.
The Configure Authenticator Menu is shown in Figure 146.
Figure 146 Configure Authenticator Menu
4. Type 1 to configure parameters for a port configured with an
authenticator port role.
This prompt is displayed:
Enter port-list:
5. Enter a port or a list of ports. Then press Return.
For information about how to specify ports, see Specifying Ports
on page 31.
The Configure Authenticator Port Access Parameters menu is
shown in Figure 147.
Note
If you configure a port as an authenticator using a Telnet session, it
is possible to lose the telnet session.
Allied Telesyn AT-8400 Series - ATS60 V2.0.0
High School Switch 142
User: Manager 00:14:33 22-Mar-2003
Configure Authenticator
1 - Configure Authenticator Port Access Parameters
2 - Display Authenticator Port Access Parameters
R - Return to Previous Menu
Enter your selection?