Allied Telesis AT-S60 - Manual (Page 484)

AT-S60 Management Software User’s Guide
Section IV: Web Browser Management 483
4. Click Add.
The Add New Trunk page is shown in Figure 176.
Figure 176 Add New Trunk Page
5. Enter the name of the trunk in the Trunk Name box.
6. Click on the ports you want to include in the trunk.
Selected ports turn white. To deselect a port, click it again.
7. Scroll down the page.
8. Click Apply.
You are returned to the Port Trunking page. It is updated with the
new trunk port information. The new port trunk is immediately
activated on the switch.
9. To save your changes, return to the General tab and click Save
Changes. Your changes are saved on the switch.