Allied Telesis AT-S60 - Manual (Page 18)

17
Preface
This guide contains instructions on how to configure an AT-8400 Series
Switch using the AT-S60 management software. Within this manual, the
AT-8400 Series Switch is often abbreviated to switch.
How This Guide is Organized
This manual is divided into three sections.
Section I: Overview
This section contains just one chapter. It reviews the different ways that
you can access the AT-S60 management software on a switch. In
addition, it describes how to specify ports.
Section II: Local and Telnet Management
The chapters in this section explain how to manage a switch from a local
management session or a Telnet management session.
To establish a local management session, connect a terminal or PC to the
RS-232 Terminal Port on the front of the switch.
To establish a Telnet management session, use the Telnet application
protocol. This type of management session can be performed from any
workstation on your network.