Allied Telesis AT-S60 - Manual (Page 170)

AT-S60 Management Software User’s Guide
Section II: Local and Telnet Management 169
Uploading an
Image File
Using Xmodem
or TFTP
The following procedures describe how to upload a .img file type
(image file) only. To upload other file types, see Uploading a File Using
Xmodem or TFTP on page 175. See Table 4 on page 149 for a list of file
types.
To upload a file from a switch onto your management station, perform
the following procedure:
Note
Allied Telesyn does not recommend that you upload an AT-S60
software image onto a management workstation for the purpose of
downloading it onto another switch. Obtain new AT-S60 software
images for downloading onto a switch from the Allied Telesyn web
site.
1. Start a local management session on the switch where you intend to
upload the management software image or configuration file.
2. From the Main Menu, type 4 to select Administration Menu.
3. From the Administration Menu, type D to select Downloads &
Uploads.
The Downloads & Uploads menu is shown in Figure 53.
Figure 53 Downloads & Uploads Menu
Note
Menu options 1 and 3 are described in Downloading an Image File
Using Xmodem or TFTP on page 154. Option 4 is described in
Uploading a File Using Xmodem or TFTP on page 175.
Allied Telesyn AT-8400 Series - ATS60 V2.0.0
High School Switch 142
User: Manager 00:14:33 01-Jan-2003
Downloads & Uploads
1 - Download Application Image/BootLoader
2 - Upload Application Image/BootLoader
3 - Download a File
4 - Upload a File
R - Return to Previous Menu
Enter your selection?