Allied Telesis AT-S60 - Manual (Page 565)

Chapter 38: TACACS+ and RADIUS Protocols
Section IV: Web Browser Management 564
Displaying the RADIUS Settings
To display the RADIUS settings, perform the following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 157 on page 442.
2. Select the Server-based Authentication tab.
The Server-based Authentication tab is shown in Figure 215 on
page 562.
3. Click View.
The RADIUS Client Configuration page is shown in Figure 217.
Figure 217 RADIUS Client Configuration Page
4. To close the page, click Cancel.