Allied Telesis AT-S60 - Manual (Page 487)

Chapter 31: Port Trunking
Section IV: Web Browser Management 486
The Modify Trunk page is shown in Figure 177.
Figure 177 Modify Trunk Page
5. Click on the ports to select them for port trunking.
Selected ports turn white. Click again to deselect a port.
6. Click Apply.
7. The Port Trunking page opens as shown in Figure 175 on page 482.
Your changes are immediately activated on the switch.
8. To save your changes, return to the General tab and click Save
Changes. Your changes are saved on the switch.