Allied Telesis AT-S60 - Manual (Page 535)

Chapter 35: GARP VLAN Registration Protocol
Section IV: Web Browser Management 534
Modifying the GVRP Port Configuration
To modify the GVRP port configuration:
1. From the Home Page, select Configuration.
The Configuration System page is displayed with the General tab
selected by default, as shown in Figure 155 on page 434.
2. From the Configuration menu, select the Layer 2 option.
The Layer 2 page is displayed with the MAC Address tab selected
by default, as shown in Figure 204 on page 541.
3. Select the GVRP tab.
The GVRP tab is shown in Figure 199 on page 531.
4. Select a port.
5. Click Modify.
The GVRP Port Configuration page is shown in Figure 200.
Figure 200 GVRP Port Configuration Page
6. Change the port mode if desired.
7. Click Apply.