Allied Telesis AT-S60 - Manual (Page 440)

AT-S60 Management Software User’s Guide
Section IV: Web Browser Management 439
5. In the Additional Time Parameters section you can specify the UTC
offset and enable or disable daylight savings time:
UTC Offset - Specify a difference between the UTC and local time.
The default is 0 hours. The range is -12 to +12 hours.
Daylight Savings Time - Click Enabled to enable or Disabled to
disable the switch’s ability to adjust the system time to daylight
savings time.
6. Click Apply.
Your changes are activated on the switch.
To save your changes, return to the General tab and click Save
Changes. The changes you made are saved on the switch.