Allied Telesis AT-S60 - Manual (Page 131)

Chapter 9: Port Mirroring
Section II: Local and Telnet Management 130
Deleting a Destination Port Mirror
To delete a destination port mirror and its source mirror port(s), perform
the following procedure:
1. From the Main Menu, type 1 to select Port Menu.
The Port Menu is shown in Figure 25 on page 89.
2. From the Port Menu, type 5 to select Port Mirroring.
The Port Mirroring menu is shown in Figure 38 on page 126.
3. Type 3 to select Delete Mirror.
The following prompt is displayed.
Enter Destination Port:
4. Enter the destination mirror port from the list at the top of the menu
and press Return.
For information about how to specify a port, see Specifying Ports
on page 31.
The destination port and the source port(s) are removed from the
display at the top of the Port Mirroring menu.
5. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
The port mirror on the switch is deleted. The port that was
functioning as the port mirror is now available for normal network
operations.