Allied Telesis AT-S60 - Manual (Page 420)

AT-S60 Management Software User’s Guide
Section III: Security Features 419
Configure Supplicant Parameters
After you have enabled port access control and configured a port as a
supplicant, use this procedure in this section to configure the supplicant
parameters. The procedure in Configuring the Port Access Role on
page 413 describes how to configure a port as a supplicant. For
information about the role of a supplicant, see the Port-Based Access
Network Control Overview on page 405.
To display supplicant ports and parameters, see Displaying Supplicant
Ports on page 425
To configure the supplicant parameters on a port, you need to create a
user name and password for the port. The user name and password for a
port can be any value as long as the information is present on a RADIUS
server.
Before you configure the user name and password for a supplicant,
consider if you want to use the same user name and password for all
supplicants or if you want to use a separate user name and password for
each supplicant.
To configure supplicant parameters on a port, perform the following
procedure:
1. From the Main Menu, type 6 to select Security Menu.
The Security Menu is shown in Figure 30 on page 105.
2. From the Security Menu, select Port Access Control.
The Port Access Control Menu is shown in Figure 144 on page 411.
3. From the Port Access Control Menu, type 5 to select Configure
Supplicant.