Allied Telesis AT-S60 - Manual (Page 546)

AT-S60 Management Software User’s Guide
Section IV: Web Browser Management 545
5. In the Port Number field, enter the port number that is to be assigned
the MAC address. You can specify more than one port.
For information about specifying ports, see Specifying Ports on
page 31.
6. In the VLAN ID field, enter the VLAN ID for the specified port.
The range of VLAN IDs is 1 to 4094, with 1 as the default VLAN ID.
7. Click Apply.
The MAC Addresses Table page is displayed as shown in Figure
204 on page 541.
8. Repeat this procedure to add other static or multicast addresses to
the switch.
9. Click Close.
The MAC Address tab is redisplayed. Your changes are
immediately activated on the switch.
10. To save your changes, return to the General tab and click Save
Changes. Your changes are saved on the switch.