Modifying a vlan – Allied Telesis AT-S60 User Manual
Page 267
Chapter 13: Virtual LANs
Section II: Local and Telnet Management
266
Modifying a VLAN
The section contains the procedure for adding or deleting ports from a
tagged or port-based VLAN.
To modify a VLAN, perform the following procedure:
1. From the Configure Port Based VLAN menu, type 3 to select Modify
Port Based VLAN.
The Modify Port Based VLAN menu is shown in Figure 96.
Figure 96 Modify Port Based VLAN Menu
The top portion of the menu displays the current VLANs on the
switch. For an explanation of the columns, refer to the procedure
Displaying VLANs on page 257.
Note
You cannot add or remove ports from a dynamic GVRP VLAN and
you cannot remove a dynamic GVRP port from a port-based or
tagged VLAN. For information on GVRP, refer to Chapter 15, GARP
VLAN Registration Protocol on page 283.
Allied Telesyn AT-8400 Series - ATS60 V2.0.0
High School Switch 142
User: Manager
00:14:33 01-Jan-2003
Modify Port Based VLAN
VID VLAN Name
VLAN Type
Protocol Tagged
----------------------------------------------------------------------
1
Default_VLAN
Port Based
U:
11.1-8, 12.8
T:
5.1, 6.3
12
Sales
Port Based
U:
1.1-8, 2.1-8, 3.4-8, 4.1-2, 7.1-2
9.1, 10.1-8, 12.1-7
T:
5.1, 6.3
20
Production
Port Based
U:
3.1-3, 4.3-8, 5.2-8, 6.1-8,
T:
5.1, 6.3
22
GVRP_VLAN_22
GARP
GARP
U:
T:
12.8
40
Engineering
Port Based
U:
7.3-8, 8.1, 11.1-2
T:
5.1, 6.3
GARP
T:
11.5
1 - Add Ports to VLAN
2 - Delete Ports from VLAN
3 - Set Ports to VLAN
4 - Clear Ports from VLAN
5 - Change GARP VLAN
U - Update display
R - Return to Previous Menu