Allied Telesis AT-S60 - Manual (Page 394)

AT-S60 Management Software User’s Guide
Section III: Security Features 393
Displaying SSH Information
To display SSH server information, perform the following procedure:
1. From the Main Menu, type 6 to select Security Menu.
The Security Menu is shown in Figure 30 on page 105.
2. From the Security menu, select the Secure Shell (SSH) menu.
The Secure Shell (SSH) Menu is shown in Figure 135 on page 391.
3. From the Secure Shell (SSH) menu, Select 6 - Show Server information
to display the SSH Server data.
The Show Server Information Menu is shown in Figure 136.
Figure 136 Show Server Information Menu
The following information is displayed:
❑ Versions Supported: Indicates the versions of SSH which are
supported by the AT-S60 software.
❑ Server Status: Indicates whether or not the SSH server is enabled
or disabled.
Allied Telesyn AT-8400 Series - ATS60 V2.0.0
High School Switch 142
User: Manager 00:15:42 30-Apr-2003
Show Server Information Menu
Versions Supported ....... 1.3, 1.5, 2.0
Server Status ............ Enabled
Server Port .............. 22
Host Key ID .............. 200
Host Key Bits ............ 1024
Server Key ID ............ 250
Server Key Bits .......... 768
Server Key Expiry ........ 0 hours
Login Timeout ............ 180 seconds
Authentication Available . Password
Ciphers Available ........ 3DES, 128 bit AES, 192 bit AES,256 bit AES,
Arcfour (RC4)
MACs Available ........... hmac-sha1, hmac-md5
Data Compression ......... Available
R - Return to Previous Menu
Enter your selection?