Allied Telesis AT-S60 - Manual (Page 524)

AT-S60 Management Software User’s Guide
Section IV: Web Browser Management 523
The name can be from one to 18 characters in length. The name
should reflect the function of the nodes of the VLAN (for example,
Sales or Accounting). The name can contain spaces but not special
characters, such as asterisks (*) or exclamation points (!).
If the VLAN is to be unique in your network, the name should be
unique as well. However, if the VLAN is to be part of a larger VLAN that
spans multiple switches, the name for the VLAN needs to be the same
on each switch. For example, if VLAN that is called Administration
spans three switches, then the VLAN needs to have the same name on
all three switches.
Note
You must assign a name to a VLAN.
7. To select ports for the VLAN, click on the ports in the switch image.
Clicking repeatedly on a port toggles the port through the
following possible settings:
Untagged port
Tagged port
Port not a member of the VLAN
8. Click Apply.
The VLAN is created on the switch. The VLAN is now ready for
network operations.
Note
The untagged ports that you assign to the new VLAN are
automatically removed from their current VLAN assignment.
To save your changes, return to the General tab and click Save
Changes. The changes you made are saved on the switch.