Allied Telesis AT-S60 - Manual (Page 486)

AT-S60 Management Software User’s Guide
Section IV: Web Browser Management 485
Modifying a Port Trunk
This procedure allows you to modify a port trunk using a web browser
management session.
To modify a port trunk, perform the following procedure:
1. From the Home Page, select Configuration.
The Configuration System page is displayed with the General tab
selected by default, as shown in Figure 155 on page 434.
2. From Configuration menu, select the Layer 1 option.
The Layer 1 page is displayed with the Port Settings tab shown by
default, as shown in Figure 168 on page 466.
3. Select the Port Trunking tab.
The Port Trunking tab is shown in Figure 175 on page 482.
4. Select Modify.