beautypg.com

Allied Telesis AT-S60 User Manual

Page 533

background image

Chapter 35: GARP VLAN Registration Protocol

Section IV: Web Browser Management

532

4. Configure the following parameters:

Enable GVRP
Click in this box to enable GVRP.

Leave Time
Sets the duration of the Leave Period timer. The range is from 30
to180 centiseconds and the default is 60.

Join Time
Sets the duration of the Join Period timer. The range is from 10 to
60 centiseconds and the default is 20.

Enable GIP
Enables the operation of GIP. If enabled, attribute registrations
and de-registrations processed on a port are propagated to other
ports in the GIP-connected ring.

Leave All Time
Sets the duration of the LeaveAll Period timer. The range is from
500 to 3000 centiseconds and the default is 1000.

5. Click Apply.