Allied Telesis AT-S60 - Manual (Page 442)

AT-S60 Management Software User’s Guide
Section IV: Web Browser Management 441
Activating the BOOTP and DHCP Services
For background information on BOOTP and DHCP, refer to the section
Activating the BootP and DHCP Services on page 50.
To activate or deactivate the BOOTP and DHCP protocols on the switch
from a web browser management session, perform the following
procedure:
1. From the Home Page, select Configuration.
The Configuration System page is displayed with the General tab
selected by default, as shown in Figure 155 on page 434.
2. In the Configuration section, BOOTP/DHCP item, click either Enable
or Disable.
Note
If you activate BOOTP/DHCP, the switch immediately begins to
query the network for a BOOTP or DHCP server. The switch
continues to query the network for its IP configuration until it
receives a response.