Allied Telesis AT-S60 - Manual (Page 30)

AT-S60 Management Software User’s Guide
Section I: Overview 29
SNMP Management Session
Another way to remotely manage the switch is with an SNMP
management program. A familiarity with Management Information Base
(MIB) objects is necessary for this type of management.
The AT-S60 software supports the following MIBs:
❑ SNMP MIB-II (RFC 1213)
❑ Bridge MIB (RFC 1493)
❑ Interface Group MIB (RFC 2863)
❑ Ethernet MIB (RFC 1643)
❑ Remote Network MIB (RFC 1757)
❑ Allied Telesyn managed switch MIB
You must download the Allied Telesyn managed switch MIB files
(atiChassisSwitch.mib and atiStackinginfo.mib) from the Allied Telesyn
web site and compile the file with your SNMP program. For instructions
on how to compile the MIB file with your SNMP program, refer to your
SNMP management documentation.
For information about how to configure SNMP communities using a
local or Telnet management session, see Chapter 4, SNMP Community
Strings on page 68.
Note
SNMP management can use the enhanced stacking feature through
the private MIB (atiStackinginfo.mib). See Chapter 5: Enhanced
Stacking on page 79.