Allied Telesis AT-S60 - Manual (Page 422)

AT-S60 Management Software User’s Guide
Section III: Security Features 421
6. Select the parameter that you want to modify. They are described
below:
1 - Auth Period: This is the initialization time used by the
authentication timer. The value is in seconds. The default is 30
seconds. The range is 1 to 300 seconds.
2 - Held Period: This is the initialization value for the supplicant
held timer. The value is in seconds. The default is 60 seconds. The
range is 0 to 65,535 seconds.
3 - Max Start: This parameter determines the maximum number
of successive EAPoL Start messages that are sent before the
Supplicant assumes there is no Authenticator. The value is in
whole numbers. The default is 3 messages. The range is 1 to 10
messages.
4 - Start Period: This parameter provides the initialization value
for the timer that determines when EAPoL Start messages are
sent. The value is in seconds. The default is 30 seconds. The range
is 1 to 60 seconds.
5 - User Name: Enter a user name to access the supplicant port.
The values of Manager and Operator are not permitted. There is
no default value. This is an alphanumeric value of up to 40
characters.
6 - User Password: Enter a password to access the supplicant
port. There is no default value. This is an alphanumeric value of up
to 40 characters.
7. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.