Allied Telesis AT-S60 - Manual (Page 562)

AT-S60 Management Software User’s Guide
Section IV: Web Browser Management 561
Global Server Timeout
This parameter specifies the maximum amount of time the switch
waits for a response from a TACACS+ server before assuming the
server cannot respond. If the timeout expires and the server has
not responded, the switch queries the next TACACS+ server in the
list. If there are no more servers, then the switch defaults to the
standard Manager and Operator accounts. The default is 30
seconds. The range is from 1 to 30 seconds.
IP Address, Port #, and Encryption Key
Use these fields to specify the IP address, UDP port number, and
encryption key of each RADIUS server. You can specify up to a
maximum of three servers. You can leave the encryption field
blank if you entered the server’s key in the Global Secret field.
5. After you have finished configuring the parameters, click Apply.
6. To save your changes, return to the General tab and click Save
Changes. The changes you made are saved on the switch.