Allied Telesis AT-S60 - Manual (Page 283)

Chapter 14: Multiple VLAN Modes
Section II: Local and Telnet Management 282
Displaying VLAN Information
To view the name, VID number, and member ports of the VLANs on a
switch, perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Menu.
The VLAN Menu is displayed as shown in Figure 91 on page 257.
2. From the VLAN Menu, type 2 to select Display VLAN.
The Display VLAN Menu is displayed as shown in Figure 92 on
page 257.
3. From the Display VLAN menu, type 3 to select Display Port Based
VLAN.
An example of the Display Port Based VLAN Menu is shown in Figure
97.
Figure 97 Display Port Based VLAN Menu
The example shows a switch operating in the 802.1Q-compliant VLAN
mode, with port 4.2 acting as the uplink port.
Allied Telesyn Ethernet Switch AT-S60
Login Privilege: Manager
Display Port Based VLAN
VID VLAN Name VLAN Type Protocol Tagged(T)/Untagged(U)
-------------------------------------------------------------------------
1 Client_1 Port Based U: 1.1
Port Based T: 4.2
2 Client_2 Port Based U: 1.2
Port Based T: 4.2
3 Client_3 Port Based U: 1.3
Port Based T: 4.2
4 Client_4 Port Based U: 1.4
Port Based T: 4.2
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?