Allied Telesis AT-S60 User Manual
Page 262
AT-S60 Management Software User’s Guide
Section II: Local and Telnet Management
261
3. From the Configure VLAN menu, type 4 to select Configure Port
Based VLAN.
The Configure Port Based VLAN menu is shown in Figure 95.
Figure 95 Configure Port Based VLAN Menu
The top portion of the menu displays the current VLANs on the
switch. For an explanation of the columns, refer to Displaying VLANs
on page 257. If you have not created any VLANs, this menu contains
only the Default_VLAN.
4. Type 1 to select Create Port Based VLAN.
The following prompt is displayed:
Enter VLAN Name:
5. Enter a name for the new VLAN.
The name can be from one to nineteen characters in length. The
name should reflect the function of the nodes that are part of the
VLAN (for example, Sales or Accounting). The name cannot contain
spaces or special characters, such as asterisks (*) or exclamation
points (!).
Allied Telesyn AT-8400 Series - ATS60 V2.0.0
High School Switch 142
User: Manager
00:14:33 01-Jan-2003
Configure Port Based VLAN
VID VLAN Name
VLAN Type
Protocol Tagged
----------------------------------------------------------------------
1
Default_VLAN
Port Based
U:
11.1-8, 12.8
T:
5.1, 6.3
12
Sales
Port Based
U:
1.1-8, 2.1-8, 3.4-8, 4.1-2, 7.1-2
9.1, 10.1-8, 12.1-7
T:
5.1, 6.3
20
Production
Port Based
U:
3.1-3, 4.3-8, 5.2-8, 6.1-8,
T:
5.1, 6.3
22
GVRP_VLAN_22
GARP
GARP
U:
T:
12.8
40
Engineering
Port Based
U:
7.3-8, 8.1, 11.1-2
T:
5.1, 6.3
GARP
T:
11.5
1 - Create Port Based VLAN
2 - Delete
Port Based
VLAN
3 - Modify
Port Based
VLAN
U - Update display
R - Return to Previous Menu
Enter your selection?