Allied Telesis AT-S60 - Manual (Page 421)

Chapter 25: 802.1x Port-Based Access Control
Section III: Security Features 420
The Configure Supplicant Menu is shown in Figure 148.
Figure 148 Configure Supplicant Menu
4. Type 1 to select Configure Supplicant Port Access Parameters to
configure supplicant parameters.
The following prompt is displayed:
Enter port-list:
5. Enter a port or a list of ports. Then press Return.
For information about how to specify ports, see Specifying Ports
on page 31.
The Configure Supplicant Port Access Parameters menu is shown
in Figure 149. The supplicant port access parameters are listed as
menu items with factory set default ranges.
Figure 149 Configure Supplicant Port Access Parameters Menu
Allied Telesyn AT-8400 Series - ATS60 V2.0.0
High School Switch 142
User: Manager 00:14:33 22-Mar-2003
Configure Supplicant
1 - Configure Supplicant Port Access Parameters
2 - Display Supplicant Port Access Parameters
R - Return to Previous Menu
Enter your selection?
Allied Telesyn AT-8400 Series - ATS60 V2.0.0
High School Switch 142
User: Manager 00:14:33 22-Mar-2003
Configure Supplicant Port Access Parameters
Configuring Ports 2.7
1 - Auth Period ......... 30 Seconds
2 - Held Period ......... 60 Seconds
3 - Max Start ........... 3
4 - Start Period ........ 30 Seconds
5 - User Name: ..........
6 - User Password: ......
R - Return to Previous Menu
Enter your selection?